Attach the wires to a new switch connecting the hot source to the bottom terminal and the wire running to the light to the top terminal. On a receptacle the black wire from the source goes on the hot, brass colored screws and the white goes to the neutral, silver colored screws. If there are two sets of wires on a receptacle, keep them in sets using the top terminals for one and the bottom terminals for the other set.
Insert a clamp, with wires attached, into the junction box hole and from inside the box, push the included nut over the wires and onto the clamp threads. Turn the nut as far as possible onto the threads and then use a screwdriver and hammer to tap it down until it’s tight.
Tap for See More Image Radio Wiring Diagram Bmw E46 Installing A Sub With Stock Stereo System Rafio Harness
If the existing receptacle or switch is connected through the holes in the back, push a jewelers screwdriver or similarly shaped tool into the slot next to each hole to release the clamp pressure and pull the wire free.
If the ends of the wires are too far apart, the nut won’t go on properly. Be sure the ends match up before twisting them together. If necessary, snip off a bit at the tip to get them even before attaching the connector.
Hit If You Want View Another Radio Wiring Diagram Bmw E46 Installing A Sub With Stock Stereo System Rafio Harness
Bmw E46 Business Radio Wiring Diagram 5 Series Harness Stereo Loom Cable Rafio Picture Of Late For Sale
Bmw E46 M3 Radio Wiring Diagram Delighted Harness Contemporary Electrical Rafio Terrific Images Best Image Engine
Bmw 318i E46 Radio Wiring Diagram Harness Connectors Rafio Factory Q Xenon Headlight
Radio Wiring Diagram Bmw E46 Installing A Sub With Stock Stereo System Rafio Harness
Bmw E46 M3 Radio Wiring Diagram I Removed The Factory From My There Are Two Rafio Harness Graphic